HARDWARE REQUIREMENTS
RECOMMENDED SLICER SETTINGS
ABOUT SLICING
SINGLE USER LICENSE
PARTNER LICENSE
HARDWARE REQUIREMENTS

Minimum Build Plate Dimensions    L x H x W   (X x Y x Z)

Half Stack :   5.25"  x  4"  x  4.5"  /  135mm x 102mm x 115mm

XL Half Stack :   5.25"  x   4"  x  6.5"  /  135mm x 102mm x 166mm

Stack :   9.8"  x  4"  x  4.5" / 250mm x 102mm x 114mm

XL Stack :   9.8"  x  4"  x 6.5"  /  250mm x 102mm x 166mm

Z Axis Minimum :  8.7 Inches / 220mm for the longest BudDrivers

 

Please ensure that your printer is capable of printing the models you would like to purchase, before purchasing.

 

Most 3D printers can print Half Stacks, but Stacks require larger build volumes than most common desktop 3D printers.  XL BudDrivers also exceed the print volume of smaller printers.

RECOMMENDED SLICER SETTINGS

Nozzle Diameter : .4mm / .5mm
Layer Height : .2mm / .3mm
Top/Bottom Solid Layers : 3-6
Outer Perimeters : 3
Infill : 30%+
Infill Type : Grid / HoneyComb 
Infill Overlap : 15 %

 

If possible, print the outer shell at slower speed, this will ensure better accuracy of mold cylinders.

 

BudDrivers should be printed completely solid, with infill set to 100%, for maximum strength.

 

Molds are optimized to be printed in a vertically standing orientation. If you change the orientation, results may vary. 

All cannagar mold models were designed to be printed vertically standing and have been geometrically optimized to print best in this orientation. If you change the orientation and print flat against the print bed, your results will vary.   For best results, print in the orientation provided.

ABOUT SLICING

Cannagar Tools provides the STL files, you must slice them for use with your specific printer.

 

.gcode

.GCode is the file format read by most 3D printers.   Gcode files are produced by running your STL files though   "slicing" software that prepares gcode specific to your printer.

 

Free Slicers

 

CURA
MATTER CONTROL

SINGLE USER LICENSE

Non-Commercial Single-User License grants the purchaser permission to download and print Cannagar Tools.

Unlimited printing. Intended for use with producing cannagars at home, or professionally. Commercial production of retail cannagars is permitted without limitation. Sales of Cannagar Tools printed physical tools is Strictly Prohibited. Sales of the Tools or the Digital Files, Strictly Prohibited. This license does not grant permission to sell, share, gift, or otherwise distribute Cannagar Tools in physical form, or the digital files used to print them. The license does not grant permission to modify, or make derivative works, and/or distribute any modified files or derivatives. Our digital 3D printing files not Creative Commons, but are licensed as retail software under this End User License Agreement.

By purchasing and downloading Cannagar Tools 3D printable files, you agree to be bound by Cannagar Tools Single User License Agreement.


READ FULL LICENSE 

PARTNER LICENSE

Partner License establishes the purchaser as a production partner, and authorizes the licensee to download and print all of our 3D models for use commercially, and for their own sales of Cannagar Tools products.

 

Includes limited tech support for 3D printing our toolset on FDM printers, and access to all 3D models, and future updates to the models as software and hardware evolve. It allows the Licensed User to sell Cannagar Tools printed on their own 3D printers, in their own stores, and online. Licensee must maintain a reasonable quality inspection demonstrating integrity of product output to renew license annually. This license does not grant the user permission to sell, distribute, or modify our digital 3D printing files. All digital assets remain the sole property of Cannagar Tools / Cascadia 3D and are granted to the Partner License Holder for use with their own hardware only.

 

Digital Files may not be sold, shared, modified or otherwise distributed, without the express written permission of their owner, Cascadia 3D.   

Partner license - $59 per month subscription, or $499 annually (Discount of $309)   

If you are interested in purchasing a partner license, please reach out through our contact form on the home page.   

 

READ FULL PARTNER LICENSE

PRICING

All Complete Sets are priced the same as the physical item in the store.   This means that for the price of one physical version, you get the entire collection in digital form for unlimited printing!

Singles = $9 each                  Complete Sets = $49-129 each